Low Pollution Combustion Boiler Grate involves knowledge of mechanical structure, gas control, electrical control, etc. The actual life of the burner is directly related to the maintenance of the combustion system. Professional maintenance can improve combustion efficiency, save fuel, prolong the service life of the combustion system, reduce the failure rate of the combustion system, and provide safety for the owner.
When the burner is firing, if the program controller fault light is on, press the fault recovery button and the Low Pollution Combustion Boiler Grate will restart after reset. If the unit cannot run normally after three operations according to the above method, the unit can start normally only after it is stopped to check the cause of the fault and remove it correctly.
After the burner is started, the rotation direction of the fan motor should be consistent with the direction of the mark. At this time, the Low Pollution Combustion Boiler Grate enters the automatic control program for leak detection and ignition. The operator only needs to observe the movements of the servo motor, leak detector, and ignition controller, and if any abnormality is found, it should be dealt with in a correct manner.