Horizontal Cook Boiler Grate has become the first choice for farmers to replace cattle farming due to its light weight, small size, simple structure and wide use. encountered some problems.
Here are some common fault-prone handling and safe operation procedures for micro-tillers. When the engine maneuverability is lacking, there are three reasons for the situation. When the engine smoke color is black: the oil supply time is incorrect, the compression ratio is not up to the standard, the air intake volume is insufficient, the slight "pulling the cylinder" and the crankshaft bearing is seriously worn. The Horizontal Cook Boiler Grate mainly burns oil and should drain excess oil from the crankcase. The main reason is that the fuel has moisture, and the fuel should be used after sedimentation and filtration. When starting is very difficult, four aspects should be checked, whether the decompression handle can be opened, whether the oil can be refueled according to the label, whether the crankshaft bearing is seriously worn, and whether the cylinder liner can be "strained"
If the Horizontal Cook Boiler Grate engine has a speeding phenomenon when starting, it should quickly cut off the oil supply or block the air intake to make the engine shut down immediately. Before use, it is necessary to check all parts and transmission boxes to see if the engine bolts are loose or loose. Phenomenon: Before starting the engine, it is necessary to check whether the clutch is in the disengaged position and whether the gear lever can be placed in the neutral position.