Problems to pay attention to when buying a belt conveyor. The belt conveyor is suitable for conveying powdery, granular, small pieces, Conveyor viscous and liquid raw materials that are easy to spill. It has the characteristics of wide application coverage, small footprint, large air supply and efficiency. In the whole process of transportation, the baseband chip of the belt conveyor is critical to bear the tensile force, Conveyor which plays a key role in the actual application effect. If the rigidity is small, the conveyor belt will be deformed horizontally, causing material powder and other conditions. Generally, Conveyor it is stipulated that the number of core superimposed layers is less than 6 layers.
Look at the baffle and skirt, select according to the air supply of the belt conveyor, Conveyor and clarify the factors such as the aspect ratio of the skirt, Conveyor the size of the baffle interval, and the size of the reasonable network bandwidth. The belt conveyor can work in an inclination angle of 0°～90°. Exceeding the transportation perspective that cannot be exceeded further reduces the project cost, Conveyor reduces the transportation distance, Conveyor and saves human resources.
Covering belts should be used for belt conveyors that exceed the included angle of 70. (The benefits of using cover belts are to avoid damage to the baseband chips caused by flashing; in addition, Conveyor it can also increase the transportation of raw materials). Belt conveyors have a much higher specification for drums than flat belts. If the condition of the same belt needs to be larger than that for flat belts. Baseband chip: The baseband chip of the belt conveyor is mainly responsible for the tensile force, Conveyor but in the whole application process, Conveyor the lateral stiffness also plays a great role in the performance index and actual effect. If the rigidity of the conveyor belt is very small, the conveyor belt will cause lateral deformation, Conveyor resulting in material powder and other conditions. Baffle and skirt: The belt conveyor must first consider the air supply of the belt conveyor when selecting the skirt of the baffle, Conveyor such as the height-to-width ratio of the skirt, the size of the baffle interval, Conveyor and the size of a reasonable network bandwidth.