The actual operation of the belt conveyor, the belt conveyor is a product of my company's main business. Based on many years of application and market sales, here is a summary of its actual operation as follows, Conveyor and we will discuss in depth with everyone: Belt conveyor application It is necessary to check whether all parts of the operation, Conveyor tape buckles and load-bearing equipment are normal, and whether the fully-protected machinery and equipment are complete. The tension of the tape should be adjusted to a proper level before starting.
The belt conveyor should start at full load. Feed in after running all normal sides. It is strictly forbidden to drive after feeding. Commodities should be placed on a fixed base in accordance with the stipulated step-by-step gathering. Before the mobile belt conveyor announces its operation, Conveyor the wheels should be wedge-wedgeed or braked with a brake system to prevent walking on the job. When several belt conveyors are operating in parallel, a full channel of one meter is required between the machine and the machine, Conveyor and between the machine and the wall.
Non-motorized vehicles or passengers are strictly prohibited on the conveyor belt, Conveyor and it is forbidden to drive the transmission belt with your hands when the transmission belt runs off to prevent confusion. Before parking the belt conveyor, be sure to stop feeding, Conveyor and wait until all the materials on the transmission belt are removed before parking. The office environment of the belt conveyor and the temperature of the raw materials sent cannot be higher than 50°C and less than -10°C. Raw materials with acid-base oil and solvent components are not allowed to be transported. The belt conveyor cable does not need to be pulled and dragged randomly, Conveyor and the electric secret and reliable grounding device is used.
When understanding the operation of a belt conveyor in series, Conveyor it is necessary to start from the unloading end and start sequentially. After everything is running normally, Conveyor you can feed. When there are signs of deviation of the tape direction during the operation of the belt conveyor, the vehicle should be parked for inspection and adjustment, Conveyor and the application should not be improvised to prevent damage to the edges and lifting the load. The left and right points are my summary. I also warmly welcome professionals and the general public to clearly propose stronger proposals and methods. Together, Conveyor we will make belt conveyors stronger and more suitable for everyone.