Inspection and maintenance safety: When inspecting and repairing hot blast stoves, Hot Air Stove use blind plates or other reliable cut-off devices to prevent gas from entering from adjacent gas pipes, Hot Air Stove and strictly implement the operating license system; gas protection personnel should be monitored on site. During the internal maintenance and cleaning of the hot blast stove, the following regulations should be observed;Hot Air Stove the gas pipeline should be isolated by blind plates, all valves except the flue valve should be closed, and the valve power should be cut off;Hot Air Stove the furnace should be well ventilated, Hot Air Stove and the carbon monoxide concentration should be below 24ppm. The oxygen content should be between 18% and 21% (volume concentration), Hot Air Stove and the gas composition should be analyzed every 2h.
When repairing the partition wall of the hot blast stove, Hot Air Stove use steel to support the partition to prevent the upper brick from falling off. During the internal maintenance of the hot air pipe, Hot Air Stove the manhole should be opened
to prevent the hot air from entering. The hot blast stove must have water cooling, horizontal fixed grate burning equipment, Hot Air Stove simple operation and high thermal efficiency. The circuit control system is divided into manual control and intelligent control for users to choose. The inner tank is made of heat-resistant steel plate, Hot Air Stove and the combustion chamber is built with refractory materials, which prolongs the service life of the product, reliable performance, Hot Air Stove and convenient maintenance. It is the majority of users. best choice.