From the perspective of my country's traditional economy and energy structure, Oxidation Resistant Chain Boiler Grate is popular due to its low one-time investment cost, especially in areas with rich coal resources and low environmental protection requirements, people prefer to choose it. However, in Hairi, coal resources are scarce and coal prices are not very low, so oil and gas have certain competitiveness compared with coal. Another reason why people like coal stoves is that the operation is simple, but coal-fired pollution: waste residue, waste gas, and waste water are all available, and it is difficult to control (especially desulfurization. At present, coal-fired desulfurization technology has achieved certain results, but the investment cost is high, and the operation process It is complex and covers a large area), and the application of coal-fired is viewed from the perspective of social benefits.
The principle of Oxidation Resistant Chain Boiler Grateis to combine the gas generator and the boiler into a whole, the fuel is thrown on the grate from the coal feeding port for incineration, and the coal seam is combined with the water vapor by using high temperature, so that it is fully combustible after chemical reaction. The gas (gas) and flue gas enter the upper part of the furnace after being transformed in the incineration chamber, and a high-temperature flame is generated by the active incineration system, and the gas is fully incinerated under the effect of high temperature.
Ten advantages of Oxidation Resistant Chain Boiler Grate super energy-saving and multi-functional integrated kitchen utensils It uses clean energy as fuel, has almost no smoke emission and noise pollution, and has good safety performance: normal pressure operation, no explosion hazard. Low purchase cost: cheaper than coal-fired, oil-fired, and gas-fired boilers. Complete functions: steaming rice, cooking, boiling water, disinfection, heating, etc. in one go. No boiler, boiler room, can be used directly in the cafeteria, unlike the use of boilers that require a full-time stoker, no annual inspection is required. Personalized design can be carried out according to user needs, can be combined arbitrarily, can be increased or decreased freely, convenient for transportation, installation, disassembly, and migration, and is not displayed by time and region.