For the gas-fired Coal Fired Single Cylinder Biomass Boiler Grate, check the main gas dispatch valve to ensure that the line is clear. Do not dispatch the dispatching valve of the gas company, the gas company will help to clean, maintain and adjust the main gas source dispatching valve. If there is a sensing line, check it for damage. Check the gas pipe group, confirm whether the manual switch is active and whether the valve certificate is installed. Check that the barometer is working properly.
Accurate pressure development is critical when scheduling Coal Fired Single Cylinder Biomass Boiler Grate gas burners. Rotate the low and high pressure switches and acknowledge their operation. The protection device that can automatically shut off the gas source when the flame is turned off is an important safety device for modern gas appliances. It is not uncommon for the flame to die unexpectedly during the incineration process. For example, when the gas stove is boiling water or cooking, the water often overflows when it boils, often extinguishing the flame.
The principle of Coal Fired Single Cylinder Biomass Boiler Grate is to make part of the fuel burn too rich and the other part too lean, but the overall air volume remains unchanged. Since both parts are burned against the stoichiometric ratio, the NOx is very low. This kind of combustion is also called against the stoichiometric or non-stoichiometric combustion.