In general, we're fairly familiar with what a Steam Boiler Chain Grate Bar is and what a boiler accessory casting is, but when we're asked what are the basic features of a boiler, we might be a little skeptical.
Steam Boiler Chain Grate Bar Thermal Efficiency: The percentage of the heat that can be emitted per hour of fuel fed to the boiler (when all burnt completely) is used to generate steam or to heat water, in symbols or representations. Evaporation rate of heating surface and heating rate of heating surface Evaporation rate of heating surface is the amount of steam generated per hour per m2 of heating surface, symbol D/h; unit kg/m2·h, heating rate of heating surface is per m2 of heating surface per hour The generated (hot water) heat, symbol Q/h; unit kJ/m2·h. 3. Steam (hot water) parameters: The steam parameters are the rated pressure and temperature of the steam at the outlet of the boiler, the symbols are p, t; the unit is Mpa, °C. The hot water parameters are the rated pressure and return water temperature of the hot water at the boiler outlet. Safety indicators: For safety performance indicators, we can measure the accident rate, availability rate and continuous operation hours of the Steam Boiler Chain Grate Bar. Boiler capacity: The capacity of the boiler is divided into two types: evaporation capacity and rated evaporation capacity. We call the steam produced by the Steam Boiler Chain Grate Bar per hour as the evaporation, and the rated evaporation is the maximum value of the continuous evaporation per hour of the boiler under the rated parameters and a certain thermal efficiency, symbol D (Q), unit t /h (kJ/h, MW).
The above are the basic characteristics of the boiler. Although these professional terms are also full of problems, the professional introduction can also give us a comprehensive understanding of the basic characteristics of the boiler.