Trouble and elimination of Slag conveyor

The slag remover is a device for removing the charge. It is mainly composed of a slag hopper, a bottom cover, Slag conveyor a longitudinal beam, a weight frame, a counterweight, a main shaft and a bearing, a buffer brake, Slag conveyor a water sprayer, an overflow, and a stopper. Faults and troubleshooting: Wear problems often occur when the slag remover is impacted by materials during operation, Slag conveyor such as the wear of the bearing chamber of the transmission part. Traditional repair methods include surfacing welding and brush plating, but the high temperature thermal stress generated by surfacing welding can easily cause material damage, leading to component deformation or fracture; brush plating and remachining methods often require outsourcing, which requires a long repair period and high cost. With the development of technology, Slag conveyor polymer composite materials can be used to solve the wear problem of the slag remover. Among them, Slag conveyor the more mature application is the Mijiahua technology system. The material has good adhesion, Slag conveyor compressive strength and wear resistance. It can be repaired without disassembly on site. There is no effect of repair welding thermal stress, Slag conveyor and the repair thickness is not limited. At the same time, due to its lack of metal, Slag conveyor it can be very good. Absorb the shock and vibration of the cleaner to avoid secondary wear.